ABOUT US
VR

How to bend the aluminum composite panel | HLCALUMINIUM

How to bend the aluminum composite panel | HLCALUMINIUM


Today, we share how to bend the aluminum composite panel.


This is the cheapest aluminum composite panel produced by our factory, and it is also the cheapest aluminum panel with average quality on the market. In the eyes of our professionals, all of these can be bent, the bending method of the aluminum composite panel is actually very simple.


First of all, for the tool we choose, we should try to choose a new one. The old tool will have a gap here, and the grooves will be deep and shallow. The new tool will not have such a gap. For this stacking head, you should choose a round head, or the slot that is stacked is trapezoidal. These two types of stacking heads are the best. After choosing the machine, we need to adjust the depth of stacking heads. Put the aluminum composite panel to be stacked against the stacking machine head, and feel with your hands. It just reaches the aluminum foil, but does not exceed the aluminum foil, which is the best. After the selection is made, a special operation table must be used to operate the aluminum composite board stacking groove, the top of the operation table is usually made of large boards, which is not very smooth, Generally, a brand new plasterboard is required for operation, this kind of board is very flat and has a certain degree of elasticity. On the stage,  I don't have this kind of board here. So I will show you a simple operation, and it can still be bent.


When stacking, after the position is accurate, usually there are tools to clamp it. I don't have any tools here. So I will show you how to stack it first. When stacking, the force should be even and after stacking, it needs to be adjusted back and forth. Once, back and forth to clean up. After stacking the grooves, feel it with your hands. If you can turn it around gently, it means that the stacking is very good, but if you need to use a lot of strength to turn it around, it will definitely not work. Such a depth is not in place.


Let me show you the effect of stacking. I will tear off the protective film first, If you use a round head, the effect of stacking will be better. Have you seen it? This stack is very beautiful after being folded, and there is no trace of cracking. This is the slotting effect of our cheapest aluminum composite panel.


Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --
Chat with Us

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English