loading
NEWS
VR

Matters that should be noted for the use of aluminum composite panels


(1) Aluminum composite panel should be stored or installed in a dry and ventilated place in a proper way, avoiding water accumulation and the ambient temperature should not be higher than 70℃. Avoid installation in abnormal environment, such as smoke, dust, sand, radiation, harmful gas and chemical environment.   


(2) Aluminum composite board should be stored flat when transporting or storing. When handling, the board must be lifted up on all 4 sides at the same time, do not drag it on one side to avoid scratching the surface.   


(3) When using slotting machine or gong machine slotting, should use round head or ≥ 90. V-type flat head saw blade or milling knife slotting, need to leave 0.2-0.3mm thick plastic core board together with the panel bending edge, in order to increase the strength and toughness and prevent aluminum hydrogenation. Bend the corner too sharply or cut and hurt the aluminum panel or leave the plastic too thick will cause the aluminum panel to break or paint burst when bending the edge. 


(4) Bend the edge with even force, once formed, do not repeatedly bend, otherwise it will make the aluminum panel fracture.   


(5) In order to maintain the flatness of the aluminum composite panel and enhance its wind resistance, the aluminum composite panel needs to be lined with a skeleton and glued to the panel after bending the edge.   


(6) For curved surface decoration, you should use bending equipment to bend aluminum composite panel, slowly force, so that the board gradually reach the desired surface, do not step in place. Bending radius should be greater than 30cm. 

  

(7) Install the aluminum composite panel in the same plane according to the same process direction. Otherwise, it may cause color difference in perspective.   


(8) The protective film should be torn off within 45 days after the installation of aluminum composite panel, otherwise, the protective film will be aging due to long-term exposure to the sun. When tearing the film, it may cause the phenomenon of glue loss.   


(9) Interior wall panels should be used indoors and should not be installed outdoors to ensure their service life.   



If the surface of the board is contaminated during construction or use, use neutral detergent or alcohol to gently clean, avoid using strong acid, strong alkaline detergent cleaning.  


Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --
Chat with Us

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English