loading

Cleaning method of exterior wall aluminum plastic board

2022/05/05

Hlcaluminium-aluminium composite Panels Manufacturers

Most of the current buildings are high -rise buildings, and the outer walls are mostly decorated with aluminum plastic panels or glass decorations of various materials. Outside the exterior wall, glass curtain wall and glass windows, it is easy to attach dust. It needs to be cleaned and wiped frequently to protect the building's neat and beautiful and bright room. The cleaning of aluminum plastic panels and glass in the building needs to be operated outdoors and high -altitude. Languard such as hanging baskets, hanging plates, and lifting platforms must be used. The operation is difficult and very dangerous.

The operator must go through strict medical examinations and strict training, strictly abide by the operating specifications and safety specifications to ensure the overall cleaning work of the exterior wall aluminum plastic plate. Material cleaning method of aluminum -plastic plates on high -altitude outer walls: 1. Preparation of beforehand 1) According to the material and dirt of the outer wall aluminum plastic panel wall, determine the corresponding cleaners and tools, if necessary Essence 2) Clarify the roof status and determine water sources and power.

3) Formulate the overall operating plan. Note: The roof and the ground must ensure that someone is monitored to determine that the calling tools are unobstructed to keep in touch at any time. 2. Install the loading outer wall cleaning equipment, tools and special cleaning agents.

3. Connect the power supply and water source of the high -voltage flushing machine, install the rinse tube, and check the effect of the water gun. 4. The staff worn the work outfit and carry the darkens or hanging boards on the tools, cleaning agents. Some tools should be tied to the hanging basket or suspension, so as to accidentally fall off and hurt pedestrians.

Safety -protective rope blocking on the ground or setting safety warning signs. 5. The operation method should be from top to bottom. 6. Cleaning method: 1) Rinse the wall with water guns from high -pressure cleaning machines.

2) Check whether there are stains such as adhesive objects on the wall. 3) Immerse the water -coated device into the bucket, and apply it evenly on the wall after being fully inhaled into the cleaner. 4) Depending on the degree of dirt, use brushes, grinding plates, Baijie cloth, glue scraping and other tools to erase, and then rinse water.

5) Confirm that the cleaning wall within the scope of the operation has been cleaned, and the sliding basket or hanging board continues to work. 7. After all the operation is completed, pack the equipment and tools, evacuate the ground protective rope or warning plate, and clean the ground water track.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English