HLCALUMINUMaluminum composite panels manufacturers
Author?: HLCALUMINUM?–?Aluminum Composite Panels Manufacturers & Suppliers
In the process of designing the multi-curved aluminum veneer, we will find many problems. For inexperienced manufacturers, this is a difficult problem, so how can we solve these problems? Only by solving these problems can the products we produce meet the standards. What problems usually occur in production? Now we are here for everyone Describe the common problems in the design of multi-curved aluminum veneers, let’s take a look together! First, when punching multi-curved aluminum veneers, a large number of burrs will be generated, which will directly affect the aluminum The smoothness of the board surface. This is a relatively common problem. An important reason for this phenomenon is the heat generated by the friction between the punch and the plate surface during punching, or the angle between the punch and the plate surface is not perpendicular enough.
The usual treatment method is to use polishing to make the board surface smoother and reduce the scratches caused by mutual friction. Second, we will find that the folded edge of the multi-curved aluminum veneer will break, and we must not ignore it. This is a big problem, and we must pay attention to it. The reason for this phenomenon may be that the position of the punching hole is not accurately grasped or the setting of the punching rate is relatively unreasonable, and the punching program is not carefully written, which will affect the special-shaped hyperboloid of the aluminum veneer.
Hyperbolic aluminum veneer,.