Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
Language
Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
When we usually choose aluminum-plastic panels, do we know how to operate so that our products can become the shape we want? How should we do the steps of bending? Here we can give you some related content Introduction, if you want to know more, you can take a look.
1. First take the measuring tool, draw a line on the aluminum-plastic board, and then cut the aluminum-plastic board after confirming the size. Then use the #6 trimming knife of the trimming machine to trim the line with a depth of about 1.5 mm on the back of the aluminum-plastic panel according to the size of the bend.
Align with the line repaired by the trimming machine, and bend hard towards the position where the fracture occurs. Do not fold repeatedly, so as not to break the aluminum-plastic panel.
2. The depth of the trimming knife needs to be appropriate. If the depth of the trimming knife is too deep, the aluminum-plastic panel will be easily broken and not round enough, but if the trimming knife is too shallow, it will be difficult to bend the aluminum-plastic panel. .
3. If we want to use arc bending, we first need to tear off the aluminum on the back of the aluminum-plastic panel, and the aluminum-plastic panel will be easy to bend after tearing off.
4. If you want to further process, you need to use details or wood to make the skeleton, and then lay a layer of 3~9mm boards as the bottom, and then paste the rounded corners will be very smooth.
After this introduction, do you understand a little better? If there are other aspects of knowledge that you need to know, you can pay more attention to us, and it should be of great help to you!.
