When we usually use aluminum-plastic panel products, do we know what its construction method is? Here we can introduce some relevant content for you. After all, this is a product that we usually use in many places. I want to know take a look!
First carry out the lofting, and pop up the surface level and axis. According to the horizontal line and the axis, release the horizontal line specified in the ceiling shape drawing of the plastic aluminum plate, and calculate the layered size of the plastic aluminum plate according to the specific specifications, and draw the production and processing diagram. Pay attention to the production and processing of aluminum-plastic panels, according to the specifications of the production and processing drawings, to effectively cut the aluminum-plastic panels, it is also necessary to carry out milling, bending, and bending.
Another is for the installation of steel and aluminum keels. When installing aluminum keels, first fix the aluminum keels on the concrete floor according to the specifications and positions of the flip-out drawings. The installation must be firm, the surface layer is flat, and the specifications are accurate. For the part of steel keel installation, in order to avoid Electrochemical reactions can occur, and anti-rust treatment or gaskets are required. The next step is to install the panel. The plastic-aluminum board of the plastic-aluminum board manufacturer is connected to another plastic-aluminum board or other raw materials through bolts, anchor bolts, screws, and steel nails.
It is also necessary to apply glue, that is, to fill the gasket material at the joint. The main application of aluminum-plastic panels is building curtain walls, interior and exterior decoration design. Among them, the curtain wall is the external protection component of the building, also known as the suspension training wall, which does not bear the main engineering load, but mainly bears its own weight, wind load, earthquake response and temperature effects.
Its own weight is the force load, and often the function will not change the load, because the density of the aluminum-plastic panel is small, so the stress caused by the quality is small, and it cannot function. This is the construction method of the aluminum-plastic panel introduced to you. After this introduction, you should understand it! If you need to buy aluminum-plastic panels, be sure to call us!