HLCALUMINUMaluminum composite panels manufacturers
Author?: HLCALUMINUM?–?Aluminum Composite Panels Manufacturers & Suppliers
Hyperbolic aluminum veneer curtain wall, the overall shape is petal shape, made of 2.5 thick aluminum veneer. The board is a big and small head. After dismantling, the effect is not very good.
The entire wall surface is uneven and there are obvious creases on the reflective surface. There will always be a feeling of imbalance. Today I will help you analyze the reasons and how to do a similar project. 1. Possible installation problems, including installation system adjustment and on-site installation quality.
2. The first aluminum plate is too thin or the reinforcing ribs are unreasonably arranged, resulting in insufficient structural performance and environmental friendliness of the aluminum plate itself. 3. Insufficient support system, adjustment of horizontal and vertical frames, errors of main structure The third problem in the construction process is a variety of problems. 4. Dealing with problems The third and fourth have a lot to do with the company.
5. The problem of partial connection usually exists in this link. If you want to do well, you can only splice modules. Each plate is an independent and non-interchangeable molding surface.
After the sheet is formed, it is secured with uniform interchangeable rear supports. The size of the rear bracket is fixed, the wall keel is matched, and it is packed well during transportation without deformation. When installed, the bracket should not touch the front molding surface, and the plastic surface will not be affected.
Will not deform. Preferably glued to the film on the front. The entire installation is complete and packaged from top to bottom.
Wood grain aluminum veneer, hyperbolic aluminum veneer, aluminum window grille,.