Among the new building materials, the use of aluminum veneer and aluminum-plastic panel has a long history, among which aluminum-plastic panel appeared earlier, and what is the difference between aluminum veneer and aluminum-plastic panel, which was invented in Germany and quickly became popular all over the world? The board is a new type of board, and it is also one of the materials commonly used in interior decoration. The aluminum veneer is a sincere decorative material that has been chromized and sprayed with fluorocarbon on the surface. Maybe you don't know the difference between the two very well. Next, the editor will bring you the distinction and difference explanation between the two.
1. Different costs
In the production process of aluminum veneer, pure aluminum plate and aluminum alloy plate are mainly used, while in China, 2. The aluminum alloy plate is 5mm, the aluminum-plastic plate is 3-4mm three-layer structure, and the upper and lower parts are separated by PVC or PE. It can be seen that the cost of aluminum-plastic panels is much lower than that of aluminum veneers.
2. Different processing techniques
In the process of aluminum veneer processing, one is sheet metal processing, sheet metal processing, the purpose of which is to cut and bend the aluminum veneer to produce different shapes and sizes, and the other is painting, which is to make the aluminum veneer more usable and more functional . The processing of aluminum-plastic panels is relatively complicated, and there are four main processes: painting, compounding and repairing.
3. Different construction techniques
Since the aluminum-plastic panels are processed at the construction site, the construction freedom is large, and the aluminum veneers are directly processed and formed by the manufacturer. In the detailed construction process, there are often some small troubles due to some precision problems. Moreover, because the batch production speed of aluminum-plastic panels is faster than that of aluminum veneers, the construction schedule is guaranteed to be higher than that of aluminum veneers.
4. Different processing requirements
The aluminum veneer mainly needs good sheet metal technology in the process of processing, and it must be symmetrical and sound in the process of painting. During the composite process of aluminum-plastic panels, it is required that the precision and size of the products fully meet the standards.
The above content is the difference between the aluminum veneer and the aluminum-plastic panel compiled by the editor.
When buying, you need to know what you want, and then choose further.