HLCALUMINUMaluminum composite panels manufacturers
Author?: HLCALUMINUM?–?Aluminum Composite Panels Manufacturers & Suppliers
With the rapid development of my country's decoration and decoration industry in recent years, wood-grain aluminum veneer has excellent fading resistance, corrosion resistance, strong anti-ultraviolet ability, strong crack resistance and ability to withstand harsh weather environments, except for high-rise building curtain walls. In addition to a large number of applications, at the same time, it is more and more favored by interior decoration designers because of its wide color selection, good metallic gloss, and strong impact resistance. It is widely used in ceilings and walls of indoor high-end decoration projects. (1) Wood grain board is a high-grade decorative material, and the production and processing levels of wood grain board manufacturers in China are quite different. Special attention should be paid to the inspection of manufacturers before ordering, inspecting their production capacity and scale, engineering performance, and focusing on their technical design capabilities.
Do not use low-level and small-scale processing factories because of low prices, otherwise it will bring great difficulties to construction and management, and serious consequences will cause irreparable economic losses. (2) As an important process before wood grain board processing - on-site data measurement, it is recommended to use an infrared rangefinder for measurement. If the traditional measuring tape is used to measure, there will be measurement errors, which will have a very adverse effect on the aluminum veneer that requires tight seam splicing.
(3) When processing wood-grained boards, all aluminum veneers should not be processed at one time. The last aluminum board and corner boards in each installation area should not be processed temporarily until all the wood-grained boards in this area are processed. After the board is installed, the on-site data measurement is carried out again, and the accurate size is obtained for reprocessing, so as to avoid unnecessary rework and economic loss. (4) Although the wood grain board is a kind of metal decorative board, its fluorocarbon spray coating is easy to scratch. Therefore, in addition to requiring the aluminum veneer of the manufacturer to enter the site with a protective film, it is also important to avoid scratches and heavy objects during the handling and installation process, otherwise it will seriously affect the overall appearance of the wood grain board.
(5) For the stick-on installation method of wood-grain boards, the most common and most difficult quality problem to solve is the uneven joints between blocks, which should be paid enough attention to. In addition to paying attention to the uniform and consistent thickness of the adhesive during the construction process, the temporary fixing measures should not be removed prematurely, usually not less than 12h. (6) The wood-grained board adopts the wood-grained board installed by sticking. It is advisable to use a waterproof glass magnesium board or a large core board as the base board. The paper-faced azurite board should not be used. The main reasons are: First, the paper-faced gypsum The strength of the board itself is low, and it is not firmly bonded to the aluminum veneer; the second is that the gypsum board is not waterproof, and there are usually various water supply and drainage pipelines built in the ceiling. Once local leakage occurs, the whole wood grain board will fall off. .
Wood grain aluminum veneer,.