Introduction to building curtain wall aluminum plastic board detection methods

2022/04/28

Hlcaluminium -aluminium composite Panels Manufacturers

Building curtain wall aluminum plastic board refers to a composite board for building curtain wall materials, composite plates with plastic as the core layer, two sides as aluminum plates, and decorative and protective coating or film on the surface of the product as the product as the product as the product. Decorative surface. Nowadays, the quality requirements of new materials in the field of construction and decoration are becoming more and more strict, and manufacturers have also continuously regulated their quality control methods and means on this requirement. GB/T17748-2008 The national standards for the "Aluminum Plastic Composite Plate of the Building curtain Wall" make specific regulations on the quality control indicators and detection methods of aluminum-plastic composite boards.

1. Color difference detection

According to the standard requirements, the color difference detection uses the visual inspection method, and it is stipulated that it should be carried out under the natural light conditions of non -sunlight. However, because the lighting conditions are not regulated, the judging results are often different due to environmental differences.

Second, aluminum thickness, composite adhesive film thickness and deviation detection

1. The thickness test of aluminum material

According to the standard GB/T 17748-2008, remove the aluminum material from the sample as the test piece, and measure the thickness of the aluminum material with a minimum score value of 0.001mm (1 μm). A test point of more than 5 angles and the center part, with the minimum average and arithmetic average of all measurement values ​​as the test results.

2. Compound adhesion film (polymer film) thickness test

Compound adhesion thin-film thickness test refer to the measurement of GB/T 6672-2001 plastic film and thin tablet thickness (mechanical measurement method) standards. Measurement of the thickness and thickness deviation of thin film (polymer film).

Third, coating glitter bias test

According to the GB 9754 standard, the test work is required to use the 20 -degree luster. Test data at as many positions as possible during testing, and use the difference between the maximum value and minimum value in the test data as the bias of the gloss of the gloss of the coating of the aluminum -plastic composite plate for the building curtain wall.

Fourth, the peeling strength detection building curtain wall aluminum plastic panel peeling strength is very important. The composite strength between aluminum plates and plastic can meet the standards to maintain durable and stable performance in subsequent use.

The test is as follows:

Peel off the aluminum that is to be peeled off at both ends of the sample. One of them is cut off one end to intercept the core and aluminum materials behind, clamp the left aluminum on the top of the plywood and test with the test with the test with the test. The top of the machine is connected, and the aluminum peeled on the other end is sandwiched on the drum. The length axis of the test piece is vertical with the central axis of the drum, the test machine carrier is clear, and then connects the lower splint to the lower pinch of the test machine (please see the attachment); , Until the test piece is peeled at least 150mm, and the peeling force and the itinerary curve are recorded. Although in the standard, although the sample preparation has been provided in detail, it is inevitable that during the processing process of the sample, it will inevitably affect the front and back of the test parts. In the effect of the test results, the test machine should have the function of "hoe to the end".

In addition, the XLW intelligent electronic tensile test machine can also take into account the 180 ° departure intensity of 180 °, the peeling strength of the roller, the stretching strength and the elongation of the erection of the aluminum -plastic composite composite plate production of aluminum -plastic composite plates Test.

Fifth, aluminum -plastic composite plate production composite adhesive film (polymer film) tear strength detection

GB / T17748-2008 "ALUMINUM-PLASTIKO KONPOSTATUAREN KONTSEILUA" eraikitzeko estandar estandarrak. Zinema molekular altuaren malko indarraren proba aipatzen da angelu-molako indar gisa, izan ere, gauzatzeko metodoa GB / T11999 "plastikoa eta mehea da Erresistentziaren errendimendua Elmendor metodo esperimentala ", beraz, Elimodorf metodoa deritzo intentsitatea urratzeko. Proba "Sly-S1 Meal Meter" probatu daiteke probak egitean.

Aurrekoa hautemateko metodoaren eta detekzio-tresnen sarrera laburra da, eraikin gortina hormarako. GB / T17748-2008 detektatzeko metodoen laburpenaren bidez, Eduki desberdinen edukia GB / T 2790-1995 itsasgarria da 180 ° zuritu indarraren proba metodoa. (Material zurrunak zehaztea), GB / T 6672-2001 Zinema Plastikoa eta Tabletaren Lodia Lodia (Neurketa Mekanikoko Metodoa), GB / T 1199-1989 Plastikoa eta mehea erresistentziako proba metodoa (Elmendorf metodoa), GB / T 13022-1991, GB / T 13022-1991 Zinema plastikoa luzatzeko errendimenduaren proba metodoa eta erlazionatutako beste estandar batzuk.

Esentzi

JARRI GUREKIN HARREMANETAN
Esan iezaguzu zure eskakizunak, imajina dezakezuena baino gehiago egin dezakegu.
Bidali zure kontsulta
Chat with Us

Bidali zure kontsulta

Aukeratu beste hizkuntza bat
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Egungo hizkuntza:Euskara