Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
Language
Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
Although everyone knows that the products of aluminium composite panel manufacturers can be used as partition walls, the specific methods of use may not be understood by many people. If you want to achieve better results, you can't understand this information.
When making the partition wall, it is necessary to use the aluminum composite material panel with a thickness of 6mm or more, and then use the 3.5200mm countersunk head screw to fix it. It should be noted that the nail head should be 0.5mm lower than the surface of the board to ensure the flat surface. The exact position of the keel must be marked and marked. The distance between the center of the vertical keel is 450-600mm. The joints of the wall and the sides of the doors and windows should be installed with additional keels. If the height of the wall is greater than 2440mm, it must be in the plate. Support the keel at the joint.
During installation, the gap between the ACP sheets is 4-6mm. The manufacturer of the aluminum plastic panel recommends using 107 glue or super glue to mix thoroughly, then apply the scraper to the plate and the gap, and then use the paper tape or style tape to paste and flatten.
