Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
Language
Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
The products we pick in the aluminum composite panel manufacturer should have a flat surface,
neat edges, and the colour should be consistent,
and the hole spacing of the perforated panel should be arranged neatly.
Before installing the aluminium composite panel, the quality of the skeleton should be checked first,
focusing on checking that the boom is straight, the force is even,
the keel spacing is no greater than 500mm, if it is in a humid environment,
the spacing is required to be reduced appropriately, the lower surface of the keel is smooth without a sense of falling,
the main and accessories are connected tightly and firmly, etc., to confirm that it is qualified before binding.
It should be broken along the cutting so that the edges of the cut panels are straight and square,
without defects such as missing flutes and dropped corners.
Lay the board fixed,
lay the side of the aluminium composite board with the supporting keel perpendicular to each other,
there should be no hanging phenomenon.
The aluminium composite panel should be tightened when docking, but should not be strongly pressed into place,
it can be from a board corner or the middle ranks, but should not be paved at the same time,
requiring the board seam to be straight, the width is the same, and there should be no wrong seam;
the butt joints should be staggered, and the joints on both sides of the wall should not fall on the same keel.
