Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
Language
Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
The aluminium composite panel manufacturer reminds us that when handling aluminium composite panels,
you should lift all four sides of the panel at the same time, push and pull the panel surface to avoid damage and forbid pulling it out.
When storing aluminium composite panels, they should be placed on a dry and ventilated floor mat,
flattened on a flat surface and not stepped on or collided with.
And during the warranty period of the aluminium curtain wall,
regular inspections and visits should be checked by the supplier to find out the hidden quality problems and eliminate them in time.
For rubber strips and injection glue should also be inspected at all times,
and if the fruit finds that the curtain is falling off or broken,
replace or repair it immediately. When slotting with a slotting machine or gong machine,
please use a semi-circular head type milling cutter greater than 90 degrees,
the lower edge should not damage the aluminium veneer, nor should it be too shallow to make folding difficult.
A plastic core of 0.2-0.3MM thickness can be bent with the aluminium veneer to improve strength and toughness,
otherwise the aluminium veneer may break and the coating film may break when bending.
