Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
Language
Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
In the process of using the wholesale aluminium composite panel products,
we should pay attention to many problems that may arise,
like what should be done if deformation occurs?
In the extrusion adjustment link, easy to bend the profile, we should pay attention to the adjustment, the force is too large,
the profile is easy to deformation, cut,
orange peel and other phenomena, the force is too small then the adjustment of the profile will become not straight,
the profile is likely to bend. Then comes the extruded frame, after sawing off the length of the ruler,
the aluminium composite panel is usually fitted with a frame,
at which point attention is paid to whether this material is a large or small material, with a tube or a flat die pulling out the material.
Generally speaking, large materials and materials with tubes lift the frame at both ends without bending easily,
but small materials and materials extracted by flat dies, which tend to bend at both ends of the lift,
should lift the frame from the ends towards the middle, but even with profiles that do not work this way,
in which case the frame must be lifted by placing this material on the timed profile.
