Labarai
Aluminum Composite Panel Manufacturers & Suppliers a China tun 2002 - Henglicai ACP
Harshe
Aluminum Composite Panel Manufacturers & Suppliers a China tun 2002 - Henglicai ACP
Construction da fasaha na bushe ratayealuminum roba farantin
① Kafa fita
Kafa fita za a iya za'ayi bisa ga ainihin cibiyar line kuma tadawa batu na injiniya. Bisa ga axis na ginin
A aluminum roba farantin tsarin da aka hada da kwance, kuma a tsaye members. Da farko karye matsayin line na tsaye members, sa'an nan sanin anga batu na tsaye members.
② Shigar da tsayayyen connector
A kan tushen da kafa fitar, gyara connector da lantarki waldi, da kuma amfani taguwa biyu na antirust Paint a Weld. A connector an welded da kuma gyarawa tare da saka sassa a kan babban tsarin. A lokacin da babu saka ƙarfe sassa a kan babban tsarin, da ramukan za a iya fadi na sukar a kan babban tsarin da kuma fadada kusoshi za a iya shigar a gyara haši.
③ Shigar da firam
A tsarin za a iya shigar da waldi, da kuma tadawa da kuma cibiyar line matsayin za a bari a kowane lokaci. A lokaci guda, da giciye-sashe a haɗa welds za a bi da antirust Paint, da kuma boye dubawa records za a yi don gyarawa haši, ciki har da tsawon, kauri, matsayi, saka tadawa, yawa da kuma saka zurfin da connector welds .
④ Installation na aluminum roba farantin
A ciki firam na profile, da dunƙule ramukan za a milled farko, da kuma aluminum-roba farantin gama za a iya gyarawa a kan profile karfe frame daya bayan daya tare da rivets. A rata tsakanin faranti ne 10 ~ 15mm, sa'an nan allurar silicone weather resistant sealant. Kafin shigarwa na aluminum farantin, an haramta cire marufi takarda har da marufi m film an tsage kashe kafin kammala;
Yi daidai da shugabanci nuna ta kibiya daga aluminum roba farantin.
Construction da fasaha na aluminum roba farantin labule bango
1.2.1 shigarwa na aluminum roba farantin labule bango shafi za hadu da wadannan bukatun:
(1) The shafi za a haɗa da connector farko, sa'an nan da connector za a haɗa da saka sassa na Babban jiki, da kuma za a iya gyara da kuma gyarawa. Column shigarwa lamba
A tsawo sabawa za su kasance mafi girma daga 3mm, da gaba da raya sabawa na axis za su kasance mafi girma daga 2mm, da hagu da dama sabawa za su kasance mafi girma daga 3mm.
(2) A shigarwa tadawa sabawa na biyu m ginshikan za su kasance mafi girma daga 3mm, kuma matsakaicin tadawa sabawa ginshikan a kan wannan kasa ba za ta fi 5mm
A nesa karkacewa daga nan ba zai zama mafi girma daga 2mm.
1.2.2 shigarwa na aluminum roba farantin labule bango katako, mãsu haɗuwa da wadannan bukatun:
(1) The haši da gaskets qarishe biyu na katako za a shigar a qaddara matsayi na shafi, wanda za a iya shigar da tabbaci, da kuma gidajen abinci zai zama m.
(2) A kwance tadawa sabawa na biyu m bim za su kasance mafi girma daga 1mm. Tadawa karkacewa daga cikin wannan kasa: a lokacin da nisa daga wani bango ne kasa fi ko daidai to 35m, shi ne ba a yarda
Za ta fi 5mm. Lokacin da nisa daga wani labule bango ne mafi girma daga 35m, to ba za ta kasance mafi girma daga 7mm.
1.2.3 shigarwa na aluminum roba farantin labule bango gyara za hadu da wadannan bukatun:
(1) A kwance kuma a tsaye a haɗa mambobi za a binciki, auna da kuma gyara.
(2) A lokacin da installing aka gyara, da karkacewa tsakanin hagu da dama, sama da kasa za su kasance mafi girma daga 1.5mm.
(3) A lokacin da shigarwa na komai gidajen abinci, dole ne akwai mai hana ruwa matakan da magudanun ruwa da ramukan bisa ga zane da bukatun.
(4) Idan ciko silicone weather resistant m, da nisa da kuma kauri daga aluminum-roba farantin hadin gwiwa za a gina bisa ga fasaha sigogi lasafta a cikin zane.
1.2.4 da canja taro sabawa na tsaye da kuma mai gangara membobin aluminum roba farantin labule bango zai cika da arziki a cikin wadannan tebur.
Dubawa hanya domin canja karkacewa daga abu size kewayon
1. Yi amfani da tef ɗin ƙarfe don auna nisa tsakanin mambobi na tsaye biyu masu kusa (kafaffen ƙarshen) ± 2.0
Dokar jagora don faranti biyu na aluminum kusa da ƙasa 20m ± 1.5 ± 2.0
2. Za a yi amfani da tef ɗin ƙarfe lokacin da nisa tsakanin mambobi biyu masu kusa da juna bai wuce 2000 ba kuma lokacin nisa shine ≥ 2000 ± 1.5 ± 2.0
3. Diagonal Bambanci na Rarraba 3. Lokacin da diagonal tsawon kasa da 2000 da diagonal tsawon ne ≥ 2000, 3.03.5 da karfe tef ko tsawo mai mulkin.
4. Lokacin da tsayin tsayin tsayin mambobi na tsaye shine ≤ 30m, lokacin da tsayin ya kasance ≤ 60m, lokacin da tsayin ya kasance ≤ 90m, lokacin da tsayi ya kasance ≤ 60m.> 90m, amfani da theodolite ko Laser kayan aiki
Akwai bambanci na matakan 2 ko 2 tsakanin farantin karfe biyu na gaba
6. Matsayin memba mai jujjuyawa lokacin da memba bai wuce 2000 ba kuma tsayin memba yana ≥ 2000 23 matakin ko matakin.
7. 2.0m tsarin jagora za a yi amfani da shi don madaidaiciyar mambobi a tsaye
8. Lalacewar gefen waje na memba na tsaye zai zama ≤ 2 ≤ 5 ≤ 7 ≤ 9 lokacin da nisa na ginshiƙan ginshiƙan guda uku ≤ 20m, faɗin ≤ 40m, faɗin ≤ 60m, faɗin shine ≤ 60m.> 60m
≤ 10 Laser kayan aiki
Tsawon matakin 9 na manyan mambobi a tsayi iri ɗaya ≤ 35m tsayin 35m ≤ 5 ≤ 7 suna amfani da ma'aunin matakin.
10. A kwance an haɗa kusurwar haɗin haɗin gwiwa a ƙarƙashin farantin filastik aluminum an ba da izinin karkata zuwa sama, ba ƙasa + 2.0-0 ma'aunin ji
11. An ba da izinin kusurwar kwancen da aka haɗa da kusurwar haɗin haɗin gwiwa akan farantin aluminum-roba don karkatar da ƙasa ta + 0-2.0
