Aluminum composite panel manufacturer said, in the use of aluminum composite panel,
must pay attention to all aspects of the requirements to ensure good quality and effect of use.
To pay attention to the thickness of the pendant or corner code of the panel plate should not be less than 3mm,
is to come in the pendant or corner code for the rivet or wrong bolt with the panel articulation,
can use stainless steel materials, rivets, screws or bolts of the diameter and number,
should be determined by calculation, rivets, screws or bolts in the hole of the new edge of the board spacing,
should not be less than 2 times the diameter of the hole,
the new distance in the hole should not be less than 3 times the diameter of the hole, then is The bottom of the board seam,
can be filled with foam strips, the board seam is suitable for use of neutral silicone weather sealant embedded seam,
the thickness of the adhesive seam should not be less than 3.5mm, the width should not be less than 2 times the thickness,
in the stop riveting articulation, the hole and rivets should be reserved between not more than 0.3mm gap,
to prevent the aluminum composite panel by extrusion and deformation of the situation.
And in the group corner words, should come in front of the seam lining thickness of not less than 1.5mm aluminum plate,
with rivets articulated aluminum plastic plate and lining plate.