In the processing of wholesale aluminium composite panels, if cutting is to be carried out, the two main forms include cutting and sawing.
The cutting process is carried out on building material machines and equipment designed for sheet metal.
During the process, the flatness of the aluminium composite panel is ensured,
there should be no impurities or foreign objects on the table of the cutting bed,
the cleanliness of the cutting table is ensured, and when cutting,
an appropriate amount of processing allowance and the front inclination of the knife saw are left.
Aluminium composite panel sawing on the sawing machine requirements for the sawing machine for the special metal plate processing knife saw,
processing equipment speed shall not be less than 3000 rpm, processing mobile speed shall not be higher than 5 m / min.
The movement of the knife saw in the linear guide relies on the knife into the knife, the knife saw moves smoothly.
And after cutting, the requirements for the processed aluminium sheet are
that there should be no burrs on the edge of the aluminium sheet and no debris in the sandwich of the sheet.