Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
Language
Aluminium Composite Panel Manufacturers & Suppliers in China since 2002 - Henglicai ACP
Today, we share how to bend the aluminum composite panel.
This is the cheapest aluminum composite panel produced by our factory, and it is also the cheapest aluminum panel with average quality on the market. In the eyes of our professionals, all of these can be bent, the bending method of the aluminum composite panel is actually very simple.
First of all, for the tool we choose, we should try to choose a new one. The old tool will have a gap here, and the grooves will be deep and shallow. The new tool will not have such a gap. For this stacking head, you should choose a round head, or the slot that is stacked is trapezoidal. These two types of stacking heads are the best. After choosing the machine, we need to adjust the depth of stacking heads. Put the aluminum composite panel to be stacked against the stacking machine head, and feel with your hands. It just reaches the aluminum foil, but does not exceed the aluminum foil, which is the best. After the selection is made, a special operation table must be used to operate the aluminum composite board stacking groove, the top of the operation table is usually made of large boards, which is not very smooth, Generally, a brand new plasterboard is required for operation, this kind of board is very flat and has a certain degree of elasticity. On the stage, I don't have this kind of board here. So I will show you a simple operation, and it can still be bent.
When stacking, after the position is accurate, usually there are tools to clamp it. I don't have any tools here. So I will show you how to stack it first. When stacking, the force should be even and after stacking, it needs to be adjusted back and forth. Once, back and forth to clean up. After stacking the grooves, feel it with your hands. If you can turn it around gently, it means that the stacking is very good, but if you need to use a lot of strength to turn it around, it will definitely not work. Such a depth is not in place.
Let me show you the effect of stacking. I will tear off the protective film first, If you use a round head, the effect of stacking will be better. Have you seen it? This stack is very beautiful after being folded, and there is no trace of cracking. This is the slotting effect of our cheapest aluminum composite panel.
