Aluminum plastic board knowledge -aluminum plastic board characteristics and production process

Hlcaluminium -aluminium composite Panels Manufacturers

Aluminum -plastic board knowledge — characteristics of aluminum -plastic board and production process I. The characteristics of aluminum -plastic boards:

Aluminum -plastic plate is a new type of decorative material. Compared with other decorative materials, it has many unparalleled superiority. On the one hand, aluminum plastic boards are a composite material, which can obtain new properties that many original components are obtained through composite.

On the other hand, aluminum -plastic boards are a high -tech product. Whether it is production or application, it contains high technical content.

Many advanced processes are used in production, such as rolling coating technology and continuous thermal composite technology, ensuring the full play of material performance.

The main features of aluminum plastic boards are manifested in the following aspects.

1. Small quality:

Aluminum -plastic plates are composed of plastic core materials with less aluminum and density, so compared with aluminum (or other metals) with the same rigidity or thickness, their quality is small than glass and stone. The quality is even more quality. It's much smaller.

2. Good rigidity:

The aluminum -plastic board cleverly uses the mechanical principle of the steel structure of the steel, and the clever hunger gives it unique mechanical properties. In addition, aluminum plastic boards achieve compound under high temperature conditions, and the two -layer aluminum plate of aluminum plates in the entire processing process is certain to certain In the state of tension, when the type of cooler is cooled, because the symmetrical aluminum plate and the core material are produced in the contraction rate, the internal stress of the board is stable and has a good rigidity. Compared with single -layer aluminum plates, its elasticity limit is large, it is not easy to produce deformation. In a natural state without much external force, it can maintain good flat performance for a long time.

3. Rich color and strong decorative:

The level of aluminum plastic board can be made into a variety of colors to carry out pattern design that matches all uses.

In addition, in order to use photographic copy technology simulation patterns, granite, wood grain, and metal patterns, it provides a pattern design with a monochrome, precision texture and high -quality pattern design. The rich color and pattern design meet the coordination that meets the requirements of different environment, enabling different architectural styles to be compatible with the environment, the selected color and environment are harmonious, and the overall artistic effect is perfect. Visual enjoyment. The curtain wall decorated with aluminum plastic panels is not inferior to the gorgeous glass curtain wall and elegant stone curtain wall.

Under the sun, its level is gorgeous and dignified, and at the same time avoid light pollution.

4. High surface flatness:

Aluminum -plastic boards are produced by continuous hot and compound production processes. Therefore, compared with a single material metal plate, its surface flatness is high, especially large -sized plates are more obvious. For building decoration, it has a flat and flat appearance.

5. Good durability:

The aluminum -plastic plate uses metal and core material thermal composite technology, which is firmly bonded. The surface coatings are selected from different materials according to the different use environment. Generally, three types of coatings are used, namely fluorocarbon coatings, polyester coatings, and acrylic coatings. Carbon coatings have better weather resistance and are mostly used in curtain wall decoration and specific occasions. Test studies have shown that they can be used for more than 20 years in harsh outdoor environments.

6. Good processability:

Aluminum -plastic plates are composed of aluminum and plastic. It is easy to process cutting, punching, digging, and bending. It can be processed with aluminum or woody processing equipment. Therefore, not only can be processed in the production plant, the proposed composite board can be processed on -site.

7. Excellent fire resistance:

Alyuminiy-seriyali taxta seriyasida, yong'in -rstral alyuminiy plastik paneli yangi ishlab chiqilgan yadro materialidan foydalanadi. Ushbu asosiy material to'ldirish patida to'ldiriladi. Talab qiling.

8. Xarajatning yaxshi xususiyatlari:

Alyuminiy yostrapast taxtalarini ishlab chiqarish "palto" va metall / yadro materiallarining doimiy issiqlik kompozitiv jarayonini qabul qiladi. Umumiy metall sohil bilan taqqoslaganda ishlab chiqarish samaradorligi yuqori va xom ashyo narxi past. Bu arzon narxlardagi xususiyatlarga ega bo'lgan materialdir.

9. Ekologik muvofiqlashtirish:

Regeneratsiya uchun olib tashlangan alyuminiy plitalarida alyuminiy va plastik yadrodan 100% regeneratsiya uchun 100% ishlatilishi mumkin.

Bundan tashqari, yog'och -ma -ma plastmassa plitasi va tashqi bezak plastmassa alyuminiy plastmassa plastmassa fluonokarbon qoplarini ishlatishadi. Mahsulotlar yuqori chidamlilik va kunlik xizmat ko'rsatish xarajatlari, butun umr bo'yi narxini pasaytiradi.

10. Keng foydalanish:

Alyuminiy yostiq panellari - bu xarajat va keng qo'llaniladi. Pardalar devorlari, ichki va tashqi devorlar, zallar, restoranlar, do'konlar, konferents-xonalar va boshqalarni bezash bilan bir qatorda, u eski binolarni rekonstruktsiya qilish uchun ham foydalanish mumkin. Ichki va tashqi devorlar va boshqalar.

Ikkinchidan, alyuminum yostrastik taxta ishlab chiqarish jarayoni:

Alyuminiy plitalarining ko'plab ishlab chiqarish jarayoni mavjud. Plastik yadroli taxtaning kompozitsion jarayoni va ikki qirrali alyuminiy plitalarni sovuq masofaviy huquqiy va issiq masofa huquqiyasiga bo'lish mumkin; Shuningdek, u doimiy ravishda keng tarqalgan huquqiy va interval bilan ajralib turishi mumkin.

Alyuminiy plastmassa plitalarini ishlab chiqarish jarayoni birinchi bo'lib alyuminiy palanlarni tozalash. Alyumin chempionlari ishlab chiqarish ehtiyojlari tufayli sirt moylash materiallari va antioksidantlar bilan qoplangan va transport paytida bir oz axloqsizlik biriktiriladi, bu esa uning yopishuviga ta'sir qiladi, shuning uchun uni tozalash kerak. Alyuminiy libos tozalangandan so'ng va kimyoviy muomala qilinadi, sirt zich kimyoviy himoya plyonkalarini ishlab chiqaradi; Ushbu kimyoviy plyonkaning salohiyatini alyuminiy plyonkaning antioksidant quvvatini yaxshilaydi va bo'yoq plyonkasining hayotini uzaytirishi mumkin.

Olishning umumiy jarayoni quyidagicha: alyuminiy rulo → purkagich → Suvni yuvish → Kimyoviy tozalash → Quritgich → Sovuqlarni qabul qilish.

Toza alyuminiy yoil qoplama mashinasiga yuborildi va alyuminiy changning yuzasida yuqori darajadagi yuqori darajadagi suyuqlikdagi florokarbon qatronlari yuborildi. Jarayon jarayoni quyidagicha:

Alyuminiy Rolls → Oziqlantirish → Flororokarbon paltosi → Issiq havo aylanmasi Bo'yoq → Sovutish → qoplama → Kesish.

"Alyuminiy" plastmassa plitasi ikkita qatlam va astar bilan qoplangan bo'lishi kerak. Devorning sirt bo'yoqlari - bu ob-havoga chidamli, ya'ni polfluoroetilen (Pvdf). Uning ajoyib antiantrabrinet faolligi va qarshi ifloslanishning himoyalangan alyuminiy palili yuzasini ushlab turishi mumkin. Alyuminiy quyma taxtaning mohiyati faqat metall ranglarga ega, balki chiroyli marmar naqshlar va ranglarga ega bo'lishi mumkin.

Flirorokarbon qoplashlari odatda rolikli rulonni qoplash usullarini alyuminiy palubalariga qo'llaydi, so'ng uni quritish uchun yuqori haroratda pishiriladi. Uskunalar uzluksiz ishlab chiqarish, birinchi bo'yoq bo'yoq, keyin bo'yoq bo'yoq bo'yoq, va nihoyat qoplamalar paltolarini kiying. Uch qatlamning umumiy qalinligi 30 mkm. Har bir laker quritish uchun 2006 ° C dan 2006 ° C gacha pishirish kerak. Pech qo'yib yuborilgandan so'ng, u havo - me'yorlar orqali tezda soviladi.

Ichki devori epoksi qatronlari, poliester qatronlari va akril qatronlaridan foydalanishlari mumkin. Bo'yoq, eng yaxshi bo'yoq va sirt bo'yoqlari bo'yalgan va sirt qatlami sirt qatlamiga yopishtirilgan qatlamga yopishtirilgan qopqoq yuzasida yotqizilgan va sirt qoplamini qayta ishlash paytida tirnalish va o'rnatish va o'rnatish va o'rnatish va o'rnatish va yotqizilgan.

Himoya plyonkasi - bu o'z-o'zini membrana va o'rnatgandan keyin e'lon qilinishi mumkin.

Flororokarbon qatronlari bilan alyuminiy rulolari plastik yadro materiallari bilan aralashadigan jarayonga kirishi mumkin. Plastik yadro asosan uch qatlam bo'lib, o'rta, o'rta, ikki tomoni yopishtiruvchi vositadir. PE varaqalari va yopishtiruvchilari alohida ishlab chiqarish mumkin va odatda keng tarqalgan uchta qatlamda ham ishlab chiqarilishi mumkin.

Uchta kasrning uchta-pe / yopishtiruvchisi alyuminiy plitaning yuqori va pastki qatlamlari bilan bog'lanadi. Murakkab alyuminiy quyma plastinka ikkala tomonning qalinligi 0,15mm qalin alyuminiy plastinka va yadro qatlami 3 dan 3 ~ 5mm, umumiy qalinligi 4-6mm. Nihoyat 1220 mm × 2440mm spetsifikatsiyani kesib oling.