Hlcaluminium -aluminium composite Panels Manufacturers
What is aluminum honeycomb board
Aluminum honeycomb plates, which belong to the plates of aerospace materials, are put into the field of civilian building, and are mainly suitable for civil buildings and car or boat decoration. The overall process of aluminum honeycomb board processing is completed in modern factories, and thermal pressure molding technology is adopted. Internal and external aluminum skin thermal expansion and contraction are synchronized, mainly due to the high heat transmission value between aluminum skin and honeycomb.
There are small holes on honeycomb aluminum skin, so the gas in the plate can flow freely. When thermal expansion and contraction occur, the structure of the installation system can not deformed.
Aluminum honeycomb board specification
The thickness of the product is generally 10-100mm, the size≤1500*5000mm, according to the special requirements of customers, you can customize 2000*6000mm.
The purpose of aluminum honeycomb board
1. Can be used as a hanging panel of the building curtain wall;
2. Use in interior decoration engineering;
3. Used to make billboards;
4. Posted on civilian on board buildings and aviation manufacturing;
5. Making indoor partitions, and use as a commodity display desk;
6. The manufacturing of commercial transport vehicles and container vehicles;
7. Manufacturing materials for bus, train, subway and rail transit vehicles;
8. Aluminum honeycomb board is a safe and non -toxic green board, so the merchant saves the necessary environmental protection procedures when processing;
9. Materials are easy to choose, such as solid wood, aluminum plates, gypsum boards and natural marble, can be made into honeycomb plates.
Aluminum honeycomb board manufacturing process
Aluminum honeycomb board products all use uniform standard pre -roller coating high -grade aluminum alloy rolls, combined with a variety of production processes. Let's take the main production process:
1. This process uses exclusive creation coating baking technology, which guarantees the adhesion of the coating and the uniformity and saturation of the color.
2. This process can provide the required color according to customer needs, and can provide other special coatings.
1. This process technology is gradually formed through a series of molds to release the stress inside the board.
2. It can strengthen the durability of the board, because it protects the surface coating on the panel is not damaged.
The production process of this process guarantees the high accuracy of the plate processing size.
3. Continuous thermal load production process has fast and efficient performance advantages.
Honeycomb composite technology
1. This art comes from the scientific and technological achievements of modern aviation. The weight is relatively lightweight, but the intensity is not affected, but it is higher.
2. The high -temperature composite and panel thermal pressure technology is adopted, so that the overallness, strength and flatness of the board are guaranteed.
Aluminum honeycomb board installation process
There are many ways to install aluminum honeycomb boards. The different style installation methods are also different.
1. Hang ear
This installation method is the separation of the hanging ear and the honeycomb plate. After the hanging ear is processed separately, the plastic seam position with the honeycomb plate is connected. The suitable width of the gum is≥12mm, this installation method makes processing simple and easy to install.
This installation method is to process the edge of the installation when processing aluminum honeycomb board. The installation only needs to comfort the connection with the keel and the gum.≥10mm, this method is easy to install, but the processing is slightly complicated, and it is not suitable for the styling curtain wall board.
This node is an aluminum buckle, and the buckle is a specific profile, which is simple to install, but this method has higher requirements for the processing accuracy of the board. It is not recommended to use it in a plate with a length of more than 3000mm or more. According to the width of the buckle, 20mm and 40mm are sewn in the board.
Aluminum honeycomb board construction process
1. Personnel preparation: 2 people installed, 2 people in porters, and 1 electric welders.
2. Tool preparation
电锤1把，铁锤1把，活动、固定扳手各2把，2米靠尺1把，吊线锤1个，角尺2把，钢丝刷1把，手电钻2把，大力钳2把，“+”2 screwdrivers, 1 rubber gun, 1 gray knife, 1 tape tape, 2 red and blue pencils, 1 set of welding machines, 1 horizontal ruler.
1. The verticality of the structural column is more positive. It is lined with the axis of the keel installation position. It is measured at a point of each point with an angle ruler to record the data. The average value is 10 mm.
2. Make a shaft position with a red and blue pencil on the floor, and use the angle ruler 90°The extension line is drawn out, setting the relative position of the dragon bone axis, and the more positive error.
Li Ting installation
1. Link angle code plus anticorrosive glue -type pad, add spring pad, add bolt and fixing the bolt and keel hand.
2. The lift of the keel is connected to the logo position, and the welding corner code is temporarily fixed.
3. The vertical error of 2 meters from the iconic keel is±2 mm, until the three -dimensional adjustment is.
4. Review the diameter and press the line method to be right.
5. Full welding angle code and burial contact position, the welding height is required to be 6-8 mm, the lines are smooth, and there are bubbles and slag.
6. Remove residue rust and remove rust -resistant paint coating.
1. Divide the beam position axis according to the construction drawings.
2. Welded the angle code according to the identification line.
3. Place the beams between the two corners, fine -tuning to the position of the entry and exit and the standing surface.
4. Compared with positive horizontal and entry and exit positions.
5. Full welding.
6. Remove the rust and anti -rust paint coating twice.
Based on the principle of horizontal vertical and vertical principle, stand upright and the central axis of the beam, adjust the curved arc board according to the design rubber seam, wrap the entire unit pillar, and then make the overall positive. All screws make up.
1. Tear the folding part of the protective film of the aluminum honeycomb plate, and press 90°The corner is placed on the side of the corner. Beauty paper in“+”The seam of the word should be folded to 90°In the corner, the entire section of the beautiful pattern paper was in place at a time, and it was flattened to avoid wrinkles from beautiful patterns.
2. Fill the foam round 榉, require dense and straightforward.
3. Press the straight line when the glue is filled, from top to bottom, from left to right.
4. The rubber should also be the end according to the principle of injection, in the end, in“+”The scraping speed of the word interface is slightly slower.
5. Torn off the beautiful paper, to be outward 45°Asability, concentrate the torn beautiful paper into the trash can to avoid environmental pollution.
6. After the weather is dry, tear off the external protective film when sweeping the tail, and wipe the dust around with a dry cloth.Essence