Which aluminum honeycomb plate specifications are aluminum honeycomb board installation processes?

Hlcaluminium -aluminium composite Panels Manufacturers

What is aluminum honeycomb board

Aluminum honeycomb plates, which belong to the plates of aerospace materials, are put into the field of civilian building, and are mainly suitable for civil buildings and car or boat decoration. The overall process of aluminum honeycomb board processing is completed in modern factories, and thermal pressure molding technology is adopted. Internal and external aluminum skin thermal expansion and contraction are synchronized, mainly due to the high heat transmission value between aluminum skin and honeycomb.

There are small holes on honeycomb aluminum skin, so the gas in the plate can flow freely. When thermal expansion and contraction occur, the structure of the installation system can not deformed.

Aluminum honeycomb board specification

The thickness of the product is generally 10-100mm, the size≤1500*5000mm, according to the special requirements of customers, you can customize 2000*6000mm.

The purpose of aluminum honeycomb board

1. Can be used as a hanging panel of the building curtain wall;

2. Use in interior decoration engineering;

3. Used to make billboards;

4. Posted on civilian on board buildings and aviation manufacturing;

5. Making indoor partitions, and use as a commodity display desk;

6. The manufacturing of commercial transport vehicles and container vehicles;

7. Manufacturing materials for bus, train, subway and rail transit vehicles;

8. Aluminum honeycomb board is a safe and non -toxic green board, so the merchant saves the necessary environmental protection procedures when processing;

9. Materials are easy to choose, such as solid wood, aluminum plates, gypsum boards and natural marble, can be made into honeycomb plates.

Aluminum honeycomb board manufacturing process

Aluminum honeycomb board products all use uniform standard pre -roller coating high -grade aluminum alloy rolls, combined with a variety of production processes. Let's take the main production process:

Coating technology

1. This process uses exclusive creation coating baking technology, which guarantees the adhesion of the coating and the uniformity and saturation of the color.

2. This process can provide the required color according to customer needs, and can provide other special coatings.

Molding technology

1. This process technology is gradually formed through a series of molds to release the stress inside the board.

2. It can strengthen the durability of the board, because it protects the surface coating on the panel is not damaged.

The production process of this process guarantees the high accuracy of the plate processing size.

3. Continuous thermal load production process has fast and efficient performance advantages.

Honeycomb composite technology

1. This art comes from the scientific and technological achievements of modern aviation. The weight is relatively lightweight, but the intensity is not affected, but it is higher.

2. The high -temperature composite and panel thermal pressure technology is adopted, so that the overallness, strength and flatness of the board are guaranteed.

Aluminum honeycomb board installation process

There are many ways to install aluminum honeycomb boards. The different style installation methods are also different.

1. Hang ear

This installation method is the separation of the hanging ear and the honeycomb plate. After the hanging ear is processed separately, the plastic seam position with the honeycomb plate is connected. The suitable width of the gum is≥12mm, this installation method makes processing simple and easy to install.

2. Bringing

This installation method is to process the edge of the installation when processing aluminum honeycomb board. The installation only needs to comfort the connection with the keel and the gum.≥10mm, this method is easy to install, but the processing is slightly complicated, and it is not suitable for the styling curtain wall board.

3. Deduction

Le ndawo i-aluminium buckle, kwaye ibhulukhwe yiprofayili ethile, elula ukuyifaka, kodwa le ndlela ineemfuno eziphezulu zokuchaneka kweBhodi. Akucetyiswa ukuyisebenzisa kwiplate kunye nobude obungaphezulu kwe-3000mm okanye ngaphezulu. Ngokobubanzi bebhungana, i-20mm kunye ne-40mm ithungiwe ebhodini.

Inkqubo yokwakha i-Aluminim yeBhodi

Ukulungiswa kokwakha

1. Ukulungiselela kwabasebenzi: 2 Abantu aba-2 bafakwa, abantu aba-2 kwabangamalungu, kunye ne-1 yombane.

2. Isixhobo sokulungiswa

1 把 1 把, 活动, 活动 各扳手 各 2 固定 1 米靠尺, 把, 吊线, 吊线“Moya”2 I-Screwdrivers, umpu werabha, i-1 grey phumela, i-Tape e-1, iipensile ezi-2, i-1 yepensile yoomatshini bokuhambisa, umlawuli othe tye.

Ukuqalisa kokwakha

1. Ukuthe tyaba kwekholamu yesakhiwo kulungile. Ifakwe i-axis yendawo yokufakelwa kwe-keel. Ilinganiswa kwinqanaba ngalinye elinomlawuli we-engile ukuba irekhode idatha. Ixabiso eliphakathi yi-10 mm.

2. Yenza isikhundla se-shaft enepensile ebomvu neluhlaza okwesibhakabhaka phantsi, kwaye usebenzise uMlawuli we-Angle 90°Umgca owandisiweyo utyhiliwe, useta isikhundla se-Dragon Bone Axis, kunye nempazamo entle ngakumbi.

Ukufakwa kwe-LI

1. Ikhonkco le-Angle ye-ANCle Pluikorrosive Glue -type Pad, yongeza i-pad yasentwasahlobo, yongeza i-bolt, yongeza i-bolt kunye ne-keel ngesandla.

2. Ukuphakanyiswa kwe-keel kuqhagamshelwe kwindawo yophawu, kwaye ikhowudi ye-wellding ye-welding ilungisiwe okwethutyana.

3. Impazamo ethe nkqo yeemitha ezi-2 ukusuka kwi-iconic Keel±I-2 mm, kude kube luhlengahlengiso lwesithathu.

4. phonononge ububanzi kwaye cinezela indlela yomgca ukuba ulungile.

5. Ikhowudi ye-welding epheleleyo kunye nendawo yokunxibelelana ngomngcwabo, ukuphakama kwe-welding kuyacelwa ukuba ibe yi-6-8 mm, imigca igudile, kwaye kukho amaqabus kunye neslag.

6. Susa i-rust yentsalela kwaye ususe i-run -urest paint.

Ukufakelwa kweBeam

1. Yahlula-hlula indawo ye-Axis ye-Axis ngokwemizobo yokwakha.

2. I-WEDED ye-Angle ikhowudi ngokuhambelana nomgca wokuchonga.

3. Beka iibhulethi phakathi kweekona ezimbini, kulungile-ubuyela kwisikhundla sokungena nokuphuma kunye nomphezulu wokuma.

4. Xa kuthelekiswa ne-Protizel kunye nokungena kunye nokuphuma kwizikhundla.

5. I-welding epheleleyo.

6. Susa i-rump kunye nepeyinti yokupeyinta kabini.

Iplate yokuxhoma

Ngokusekwe kumgaqo-siseko othe nkqo the nkqo kwaye othe nkqo, yima nkqo kunye ne-Axis ephakathi ye-Axis, uhlengahlengise ibhodi ye-ARC ye-ARC, usonge yonke intsika yoyilo, emva koko wenze into elungileyo. Zonke izikrelemnqa zenza.

Ukucocwa

1. Dibanisa indawo yokusongelwa kwefilimu yokukhusela ye-Aluminium ye-Aluminim ye-Aluminim yeConi, kwaye cinezela 90°Ikona ibekwe kwicala lekona. Iphepha lobuhle ngaphakathi“Moya”Umthungo wegama kufuneka usongelwe kwi-90°Kwikona, lonke icandelo lephepha elihle lepateni bebekhona ngexesha, kwaye lalicekecekile ukuba liphephe iimpungutye ezivela kwiipateni ezintle.

2. Gcwalisa i-hism will 榉, funa i-mughse kwaye ngqo.

3. Cinezela umgca othe tye xa iglue izaliswe, ukusuka phezulu ukuya ezantsi, ukusuka ekhohlo ukuya ekunene.

4. Irabha ifanele ibe sisiphelo ngokomgaqo wenaliti, ekugqibeleni, ngaphakathi“Moya”Isantya sokukrokra se-international icotha kancinci kancinci.

5. Torn off the beautiful paper, to be outward 45°Ukungafuneki, gxininisa iphepha elihle kakhulu kwinkunkuma ukuba likwazi ukunqanda ungcoliseko lwendalo.

6. After the weather is dry, tear off the external protective film when sweeping the tail, and wipe the dust around with a dry cloth.