Which aluminum honeycomb plate specifications are aluminum honeycomb board installation processes?

Hlcaluminium -aluminium composite Panels Manufacturers

What is aluminum honeycomb board

Aluminum honeycomb plates, which belong to the plates of aerospace materials, are put into the field of civilian building, and are mainly suitable for civil buildings and car or boat decoration. The overall process of aluminum honeycomb board processing is completed in modern factories, and thermal pressure molding technology is adopted. Internal and external aluminum skin thermal expansion and contraction are synchronized, mainly due to the high heat transmission value between aluminum skin and honeycomb.

There are small holes on honeycomb aluminum skin, so the gas in the plate can flow freely. When thermal expansion and contraction occur, the structure of the installation system can not deformed.

Aluminum honeycomb board specification

The thickness of the product is generally 10-100mm, the size≤1500*5000mm, according to the special requirements of customers, you can customize 2000*6000mm.

The purpose of aluminum honeycomb board

1. Can be used as a hanging panel of the building curtain wall;

2. Use in interior decoration engineering;

3. Used to make billboards;

4. Posted on civilian on board buildings and aviation manufacturing;

5. Making indoor partitions, and use as a commodity display desk;

6. The manufacturing of commercial transport vehicles and container vehicles;

7. Manufacturing materials for bus, train, subway and rail transit vehicles;

8. Aluminum honeycomb board is a safe and non -toxic green board, so the merchant saves the necessary environmental protection procedures when processing;

9. Materials are easy to choose, such as solid wood, aluminum plates, gypsum boards and natural marble, can be made into honeycomb plates.

Aluminum honeycomb board manufacturing process

Aluminum honeycomb board products all use uniform standard pre -roller coating high -grade aluminum alloy rolls, combined with a variety of production processes. Let's take the main production process:

Coating technology

1. This process uses exclusive creation coating baking technology, which guarantees the adhesion of the coating and the uniformity and saturation of the color.

2. This process can provide the required color according to customer needs, and can provide other special coatings.

Molding technology

1. This process technology is gradually formed through a series of molds to release the stress inside the board.

2. It can strengthen the durability of the board, because it protects the surface coating on the panel is not damaged.

The production process of this process guarantees the high accuracy of the plate processing size.

3. Continuous thermal load production process has fast and efficient performance advantages.

Honeycomb composite technology

1. This art comes from the scientific and technological achievements of modern aviation. The weight is relatively lightweight, but the intensity is not affected, but it is higher.

2. The high -temperature composite and panel thermal pressure technology is adopted, so that the overallness, strength and flatness of the board are guaranteed.

Aluminum honeycomb board installation process

There are many ways to install aluminum honeycomb boards. The different style installation methods are also different.

1. Hang ear

This installation method is the separation of the hanging ear and the honeycomb plate. After the hanging ear is processed separately, the plastic seam position with the honeycomb plate is connected. The suitable width of the gum is≥12mm, this installation method makes processing simple and easy to install.

2. Bringing

This installation method is to process the edge of the installation when processing aluminum honeycomb board. The installation only needs to comfort the connection with the keel and the gum.≥10mm, this method is easy to install, but the processing is slightly complicated, and it is not suitable for the styling curtain wall board.

3. Deduction

Bu düğüm alüminyum bir tokadır ve toka, kurulumu kolay olan belirli bir profildir, ancak bu yöntem kartın işleme doğruluğu için daha yüksek gereksinimlere sahiptir. 3000mm veya daha fazla uzunlukta bir tabakta kullanılması önerilmez. Tokanın genişliğine göre, tahtada 20mm ve 40 mm dikilir.

Alüminyum petek kartı inşaat süreci

İnşaat Hazırlığı

1. Personel Hazırlığı: 2 kişi kuruldu, 2 kişi hamallarda ve 1 elektrikli kaynakçı.

2. Araç Hazırlığı

电锤 1 把 ， 铁锤 1 把 ， 活动 、 固定 各 各 把 把 ， ， 角尺 、 吊线 吊线 锤 个 ， 角尺 2 把 ， 钢丝刷 1 把 ， 手电 钻 2 把 ， 大力 2 ， ， ， ， ， ， ， ， ， ，“+”2 tornavida, 1 lastik tabanca, 1 gri bıçak, 1 bant, 2 kırmızı ve mavi kalem, 1 set kaynak makinesi, 1 yatay cetvel.

İnşaat fırlatma

1. Yapısal kolonun dikeyliği daha olumludur. Omurga kurulum konumunun ekseni ile kaplıdır. Verileri kaydetmek için her bir noktanın bir noktasında bir açı cetveli ile ölçülür. Ortalama değer 10 mm'dir.

2. Yerde kırmızı ve mavi kalemle şaft konumu yapın ve açı cetvelini 90 kullanın°Dragon kemik ekseninin göreceli konumunu ve daha olumlu hata olan uzatma çizgisi çizilir.

Li Ting kurulumu

1. Bağlantı açısı kodu artı antikorozif tutkal tipi ped, yay ped ekleyin, cıvata ekleyin ve cıvata ve omurga elini sabitleme.

2. Omurganın kaldırılması logo konumuna bağlanır ve kaynak köşesi kodu geçici olarak sabitlenir.

3. İkonik omurgadan 2 metre dikey hata±2 mm, üç boyutlu ayarlanana kadar.

4. Çapı gözden geçirin ve doğru olmak için çizgi yöntemine basın.

5. Tam kaynak açısı kodu ve mezar temas konumu, kaynak yüksekliğinin 6-8 mm olması gerekir, çizgiler pürüzsüzdür ve kabarcıklar ve cüruf vardır.

6. Kalıntı pası çıkarın ve paslanmaya dayanıklı boya kaplamasını çıkarın.

Işın kurulumu

1. Kiriş konum eksenini yapı çizimlerine göre bölün.

2. Açı kodunu tanımlama hattına göre kaynakladı.

3. Kirişleri iki köşe arasına yerleştirin, ince giriş ve çıkış ve ayakta duran yüzey konumuna.

4. Pozitif yatay ve giriş ve çıkış pozisyonları ile karşılaştırıldığında.

5. Tam kaynak.

6. Pas ve Rust Anti -Boya kaplamasını iki kez sökün.

Asılı plaka

Based on the principle of horizontal vertical and vertical principle, stand upright and the central axis of the beam, adjust the curved arc board according to the design rubber seam, wrap the entire unit pillar, and then make the overall positive. All screws make up.

Cleansing

1. Tear the folding part of the protective film of the aluminum honeycomb plate, and press 90°The corner is placed on the side of the corner. Beauty paper in“+”The seam of the word should be folded to 90°In the corner, the entire section of the beautiful pattern paper was in place at a time, and it was flattened to avoid wrinkles from beautiful patterns.

2. Fill the foam round 榉, require dense and straightforward.

3. Press the straight line when the glue is filled, from top to bottom, from left to right.

4. The rubber should also be the end according to the principle of injection, in the end, in“+”The scraping speed of the word interface is slightly slower.

5. Torn off the beautiful paper, to be outward 45°Asability, concentrate the torn beautiful paper into the trash can to avoid environmental pollution.

6. After the weather is dry, tear off the external protective film when sweeping the tail, and wipe the dust around with a dry cloth.