Which aluminum honeycomb plate specifications are aluminum honeycomb board installation processes?

Hlcaluminium -Proizvođači aluminijskih kompozitnih ploča

What is aluminum honeycomb board

Aluminum honeycomb plates, which belong to the plates of aerospace materials, are put into the field of civilian building, and are mainly suitable for civil buildings and car or boat decoration. The overall process of aluminum honeycomb board processing is completed in modern factories, and thermal pressure molding technology is adopted. Internal and external aluminum skin thermal expansion and contraction are synchronized, mainly due to the high heat transmission value between aluminum skin and honeycomb.

There are small holes on honeycomb aluminum skin, so the gas in the plate can flow freely. When thermal expansion and contraction occur, the structure of the installation system can not deformed.

Aluminum honeycomb board specification

The thickness of the product is generally 10-100mm, the size≤1500*5000mm, according to the special requirements of customers, you can customize 2000*6000mm.

The purpose of aluminum honeycomb board

1. Can be used as a hanging panel of the building curtain wall;

2. Use in interior decoration engineering;

3. Used to make billboards;

4. Posted on civilian on board buildings and aviation manufacturing;

5. Making indoor partitions, and use as a commodity display desk;

6. The manufacturing of commercial transport vehicles and container vehicles;

7. Manufacturing materials for bus, train, subway and rail transit vehicles;

8. Aluminum honeycomb board is a safe and non -toxic green board, so the merchant saves the necessary environmental protection procedures when processing;

9. Materials are easy to choose, such as solid wood, aluminum plates, gypsum boards and natural marble, can be made into honeycomb plates.

Aluminum honeycomb board manufacturing process

Aluminum honeycomb board products all use uniform standard pre -roller coating high -grade aluminum alloy rolls, combined with a variety of production processes. Let's take the main production process:

Coating technology

1. This process uses exclusive creation coating baking technology, which guarantees the adhesion of the coating and the uniformity and saturation of the color.

2. This process can provide the required color according to customer needs, and can provide other special coatings.

Molding technology

1. This process technology is gradually formed through a series of molds to release the stress inside the board.

2. It can strengthen the durability of the board, because it protects the surface coating on the panel is not damaged.

The production process of this process guarantees the high accuracy of the plate processing size.

3. Continuous thermal load production process has fast and efficient performance advantages.

Honeycomb composite technology

1. This art comes from the scientific and technological achievements of modern aviation. The weight is relatively lightweight, but the intensity is not affected, but it is higher.

2. The high -temperature composite and panel thermal pressure technology is adopted, so that the overallness, strength and flatness of the board are guaranteed.

Aluminum honeycomb board installation process

There are many ways to install aluminum honeycomb boards. The different style installation methods are also different.

1. Hang ear

This installation method is the separation of the hanging ear and the honeycomb plate. After the hanging ear is processed separately, the plastic seam position with the honeycomb plate is connected. The suitable width of the gum is≥12mm, this installation method makes processing simple and easy to install.

2. Bringing

This installation method is to process the edge of the installation when processing aluminum honeycomb board. The installation only needs to comfort the connection with the keel and the gum.≥10mm, this method is easy to install, but the processing is slightly complicated, and it is not suitable for the styling curtain wall board.

3. Odbitak

Ovaj čvor je aluminijumska kopča, a kopča je specifičan profil, što je jednostavno za ugradnju, ali ova metoda ima veće zahtjeve za preciznost prerade ploče. Ne preporučuje se upotreba u tanjuru dužine više od 3000 mm ili više. Prema širini kopče, 20 mm i 40 mm su ušivene u ploču.

Aluminijski proces izgradnje odbora za saće

Izgradnja pripreme

1. Priprema osoblja: 2 osobe instalirane, 2 osobe u Portirerima i 1 električna zavarivača.

2. Priprema alata

1 把, 铁锤 1 把, 活动, 固定 扳手 各 2 把, 2 米靠尺 1 把, 吊线 锤 1 个, 角尺 2 把, 钢丝刷 1 把, 手电 钻 2 把, 大力 钳 2 把,“+”2 odvijača, 1 gumeni pištolj, 1 sivi nož, 1 traka, 2 crvene i plave olovke, 1 set za zavarivanje, 1 horizontalni ravnalo.

Građevinsko lansiranje

1. Vertikalnost strukturne stupce je pozitivnije. Postrojen je osi mesta za instalaciju kobilice. Mjeri se na mjestu svake tačke s kutnim vladarom za snimanje podataka. Prosječna vrijednost je 10 mm.

2. Napravite položaj osovine crvenom i plavom olovkom na podu i koristite kutni ravnalo 90°Izvlači se ekstenzivna linija, postavljajući relativni položaj zmajske kosti osi, a više pozitivnije greške.

Instalacija Li Ting

1. Kôd za vezu plus antikorozivno ljepilo -Type jastučić, dodajte opružni jastučić, dodajte vijak i pričvrstite vijak i ručnu ruku.

2. Lift kobilice povezano je na položaj logotipa, a kutni kôd za zavarivanje privremeno je fiksiran.

3. Vertikalna greška od 2 metra od ikonične kobilice je±2 mm, sve dok se ne može podesiti tri -dimenzionalno podešavanje.

4. Pregledajte promjer i pritisnite metodu linije da biste bili u pravu.

5. Potpuni kut zavarivanja Kod i kontaktni položaj sahrane, visina zavarivanja je potrebna za 6-8 mm, linije su glatke, a postoje mjehurići i šljake.

6. Uklonite hrđu ostataka i uklonite hrđe -Resistantni premaz boje.

Instalacija grede

1. Podijelite osovinu položaja snopa prema crtežima izgradnje.

2. Zavarivanje kutnog koda prema identifikacijskoj liniji.

3. Postavite grede između dva ugla, fino - unošenje položaja unosa i izlaza i stojeće površine.

4. U usporedbi s pozitivnim vodoravnim i ulaznim i izlaznim položajima.

5. Potpuno zavarivanje.

6. Izvadite hrđu i anti-ručni premaz boje dva puta.

Viseća ploča

Na osnovu principa horizontalnog vertikalnog i vertikalnog principa, postavite uspravno i središnju osovinu snopa, podesite zakrivljenu lukovnu ploču prema dizajnerskoj gumeni šav, zamotajte cijeli jedinični stup, a zatim učinite cjelokupnu jedinicu. Svi vijci čine.

Čišćenje

1. Skizite sklopivi dio zaštitnog filma aluminijumskog saća ploča i pritisnite 90°Ugao je postavljen sa strane ugla. Lijev papir u“+”Šav riječi trebao bi biti sklopljen na 90°U uglu je čitav dio prekrasnog uzorkovog papira bio na mjestu, i bio je spljošten da izbjegne bore od prekrasnih uzoraka.

2. Ispunite rud pjene 榉, zahtijevaju gustu i direktnu.

3. Pritisnite ravnu liniju kada se ljepilo napuni, od vrha do dna, s lijeva na desno.

4. Guma bi trebala biti i kraj prema principu ubrizgavanja, na kraju, u“+”Brzina struganja riječi sučelje je nešto sporija.

5. Razdvojite se od prekrasnog papira, da biste bili vanjske 45°Mogućnost, koncentrirajte rastrgani prekrasan papir u kantu za smeće kako biste izbjegli zagađenje okoliša.

6. Nakon sušenja vremena, otkinite vanjski zaštitni film prilikom pomeranja repa i obrišite prašinu sa suhom krpom.