NEWS
VR

Aluminum composite panel production process | HLCALUMINIUM

There are various production processes of aluminum composite panel, which can be divided into cold composite method and hot composite method according to the composite process of plastic core panel and two-sided aluminum panel; it can also be divided into continuous composite method and intermittent composite method. The first process of producing aluminum composite panel is cleaning aluminum coil. Aluminum coil in the production process because of the need, the surface are coated with lubricants and anti-oxidants, in transport will also be attached to some dirt, these will affect its bonding, so it must be cleaned. Aluminum coil after cleaning and chemical treatment, the surface will produce a layer of dense chemical protection film; this layer of chemical film can improve the resistance to oxidation of aluminum coil and extend the life of the paint film.


The general process of cleaning is as follows.


Aluminum coil → spray degreasing → water washing → neutralization → chemical treatment → water washing → drying → cooling → winding.   


The cleaned aluminum coil is fed into the coating machine to coat the outer surface of the aluminum coil with high performance fluorocarbon resin.



The process flow is as follows.   

Aluminum coil → feeding → coating fluorocarbon coating → hot air circulation baking → cooling → laminating → cutting → rewinding. 



The panels of exterior aluminum composite panels are to be coated with two topcoats and primers each. The top coat of the exterior wall panel is a fluorocarbon resin coating with extremely high weather resistance, namely polyvinylidene fluoride (PVDF), whose excellent UV resistance and resistance to environmental pollution make the surface of the protected aluminum coil maintain a brilliant color. The surface of aluminum composite panel can not only have the color of metal, but also beautiful marble pattern and color. Fluorocarbon coating is usually applied to the aluminum coil by roller coating method, and then baked at high temperature to dry it. The equipment is continuous production, with primer coating first, then top coating, and finally surface varnish. The total thickness of the three layers of paint reaches 30μm, and each layer of paint needs to be baked above 200 ℃ for about 60s to dry, and then cooled rapidly by air cooler after leaving the baking oven. Epoxy resin, polyester resin and acrylic resin can be used for interior wall panel paint. After the primer, top coat and surface varnish are coated, a PE protective film is immediately applied to the surface of the coating layer to avoid the surface coating from being scratched during later processing and transportation circulation and installation.   



The protective film is self-adhesive and can be removed after installation. The aluminum coil coated with fluorocarbon resin can enter the process of lamination with plastic core material. The plastic core is essentially three layers, with PE plastic in the middle and adhesive on both sides, and the PE sheet and adhesive can be produced separately or in a three-layer co-extrusion process. The structure of the adhesive/PE/adhesive three-layer co-extruded sheet is produced first, and then compounded with the upper and lower two layers of aluminum sheet, the compounded aluminum-plastic composite sheet is 0.15mm thick aluminum sheet on both sides, the core layer is 3-5mm, and the total thickness is 4-6mm. finally, the sheet is cut into 1220mm×2440mm size. 




Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --
Chat with Us

Send your inquiry

Choose a different language
English English العربية العربية Deutsch Deutsch Español Español français français italiano italiano 日本語 日本語 한국어 한국어 Português Português русский русский 简体中文 简体中文 繁體中文 繁體中文 Afrikaans Afrikaans አማርኛ አማርኛ Azərbaycan Azərbaycan Беларуская Беларуская български български বাংলা বাংলা Bosanski Bosanski Català Català Sugbuanon Sugbuanon Corsu Corsu čeština čeština Cymraeg Cymraeg dansk dansk Ελληνικά Ελληνικά Esperanto Esperanto Eesti Eesti Euskara Euskara فارسی فارسی Suomi Suomi Frysk Frysk Gaeilgenah Gaeilgenah Gàidhlig Gàidhlig Galego Galego ગુજરાતી ગુજરાતી Hausa Hausa Ōlelo Hawaiʻi Ōlelo Hawaiʻi हिन्दी हिन्दी Hmong Hmong Hrvatski Hrvatski Kreyòl ayisyen Kreyòl ayisyen Magyar Magyar հայերեն հայերեն bahasa Indonesia bahasa Indonesia Igbo Igbo Íslenska Íslenska עִברִית עִברִית Basa Jawa Basa Jawa ქართველი ქართველი Қазақ Тілі Қазақ Тілі ខ្មែរ ខ្មែរ ಕನ್ನಡ ಕನ್ನಡ Kurdî (Kurmancî) Kurdî (Kurmancî) Кыргызча Кыргызча Latin Latin Lëtzebuergesch Lëtzebuergesch ລາວ ລາວ lietuvių lietuvių latviešu valoda‎ latviešu valoda‎ Malagasy Malagasy Maori Maori Македонски Македонски മലയാളം മലയാളം Монгол Монгол मराठी मराठी Bahasa Melayu Bahasa Melayu Maltese Maltese ဗမာ ဗမာ नेपाली नेपाली Nederlands Nederlands norsk norsk Chicheŵa Chicheŵa ਪੰਜਾਬੀ ਪੰਜਾਬੀ Polski Polski پښتو پښتو Română Română سنڌي سنڌي සිංහල සිංහල Slovenčina Slovenčina Slovenščina Slovenščina Faasamoa Faasamoa Shona Shona Af Soomaali Af Soomaali Shqip Shqip Српски Српски Sesotho Sesotho Sundanese Sundanese svenska svenska Kiswahili Kiswahili தமிழ் தமிழ் తెలుగు తెలుగు Точики Точики ภาษาไทย ภาษาไทย Pilipino Pilipino Türkçe Türkçe Українська Українська اردو اردو O'zbek O'zbek Tiếng Việt Tiếng Việt Xhosa Xhosa יידיש יידיש èdè Yorùbá èdè Yorùbá Zulu Zulu
Current language:English
Send Your Inquiry